11KV PVC/XLPE insulated power cable 3x95mm2 3x120mm2
Application:
The Al-electric 11KV PVC/XLPE insulated power cable 3x95mm2 3x120mm2 can be used for bulk transmission of power over 35,000 Volts. These cables with triple layered XLPE insulation are manufactured to BS and IEC standards for a voltage range of up to 132 kV.
Construction
Conductor: Solid Aluminum orCopper conductor, round stranded or shaped
Insulation: PVC(PolyvinylChloride)
ColourCode
1 Core: Brown
2Cores: Brown orBlue
3Cores: Brown, Black,Grey
4Cores: Blue, Brown,Black, Grey
5 Cores: Green-yellow, Blue,Brown, Black, Grey
Above 5 Cores: WhiteCores with black numbers
Filler(optional): PVC or Polypropyleneyarn
BinderTape(optional): Polyester (Mylar)tape
Inner Sheath/Bedding : PVC (PolyvinylChloride)
Armour
Single Core: AWA(Aluminum WireArmour)
Multi Core: SWA(Steel Wire or Tape Armour)
Voltagerating
600/1000V
Temperaturerating
-20°C to+60°C
Bending radius
Single core: 10 xoverall diameter
Multicores: 8 xoverall diameter
Construction
Conductor
Solid Aluminum orCopper
conductor, round stranded or shaped
Insulation
PVC(PolyvinylChloride)
ColourCode
1 Core: Brown
2Cores: Brown orBlue
3Cores: Brown, Black,Grey
4Cores: Blue, Brown,Black, Grey
5 Cores: Green-yellow, Blue,Brown, Black, Grey
Above 5 Cores: WhiteCores with black numbers
Filler(optional)
PVC or Polypropyleneyarn
BinderTape(optional)
Polyester (Mylar)tape
Inner Sheath/Bedding
PVC (PolyvinylChloride)
Armour
Single Core: AWA(Aluminum WireArmour)
Multi Core: SWA(Steel Wire or Tape Armour)
Voltagerating
600/1000V
Temperaturerating
-20°C to+60°C
Bending radius
Single core: 10 xoverall diameter
Multicores: 8 xoverall diameter
Installation:
This cable can be installed in duct, tray or directburial. It is recommended that the installation instructions indicated by theLocal Electric Code, or any equivalent, be followed, so that the safeguarding ofpersons and the integrity of the product will not be affected by eciencies inthe installation
Nominal cross sectional area ofconductor | Insulation thickness | Inner Sheath thickness | | Outer Sheath thickness | Approx diameter of cable | Approx.weight of cable | D.C.resistance of conductor20°C | Parcial discharge test 1.5Uo | Current rating (A) |
Cu | Al | Cu | Al | In air | Direct in ground |
mm² | mm | mm | mm | mm | mm | Kg/km | Kg/km | Ω/km | Ω/km | pc | Cu | Al | Cu | Al |
25 | 4.5 | 1.4 | 0.5 | 2.5 | 53.69 | 3675 | 3208 | ≤0.7270 | ≤1.200 | ≤20 | 120 | 90 | 125 | 100 |
35 | 4.5 | 1.4 | 0.5 | 2.6 | 56.24 | 4167 | 3512 | ≤0.5240 | ≤0.868 | ≤20 | 140 | 110 | 155 | 120 |
5 | 4.5 | 1.5 | 0.5 | 2.7 | 58.83 | 4787 | 3852 | ≤0.3870 | ≤0.0641 | ≤20 | 165 | 130 | 180 | 140 |
70 | 4.5 | 1.5 | 0.5 | 2.8 | 62.90 | 5682 | 4374 | ≤0.2680 | ≤0.443 | ≤20 | 210 | 165 | 220 | 170 |
95 | 4.5 | 1.6 | 0.5 | 3.0 | 66.13 | 6640 | 4864 | ≤0.1930 | ≤0.320 | ≤20 | 255 | 200 | 265 | 210 |
120 | 4.5 | 1.7 | 0.5 | 3.1 | 69.76 | 7643 | 5400 | ≤0.1530 | ≤0.253 | ≤20 | 290 | 225 | 300 | 235 |
150 | 4.5 | 1.7 | 0.5 | 3.2 | 73.08 | 8769 | 5965 | ≤0.1240 | ≤0.206 | ≤20 | 330 | 255 | 340 | 260 |
185 | 4.5 | 1.8 | 0.5 | 3.3 | 77.26 | 10109 | 6651 | ≤0.0991 | ≤0.164 | ≤20 | 375 | 295 | 380 | 300 |
240 | 4.5 | 1.9 | 0.5 | 3.5 | 82.86 | 12122 | 7637 | ≤0.0754 | ≤0.125 | ≤20 | 435 | 345 | 435 | 345 |
300 | 4.5 | 2.0 | 0.8 | 3.6 | 89.61 | 15208 | 9600 | ≤0.0601 | ≤0.100 | ≤20 | 495 | 390 | 485 | 390 |
Photo of the 11KV PVC/XLPE insulated power cable 3x95mm2 3x120mm2